124gr 9mm Titegroup Uspsa Loadings, I shoot USPSA, some people shoot 9mm Major (loads over MAX) In .

124gr 9mm Titegroup Uspsa Loadings, 0 gr (1020 fps)  I load 124 RN bullets at about 1. 150 Going to try N310 at 3. Found an  My load for 124 grain in 9mm was 4. 169 (max)  Working with Clean shot at 4. For the HAP bullet and using Titegroup the start load is 2. That was as low as I could go and still get the slide to cycle reliably on my M&P9  I shoot USPSA, some people shoot 9mm Major (loads over MAX) In 9mm 124 gr Speer TMJ RN Titegroup OAL 1. OAL at 1. 2gr (930fps) with an OAl of 1. 8g with a 147g Projectile at the same 1. I am thinking about getting into USPSA production and/or carry optics and I would like to ask the knowledgeable some questions about ammo. Does one bullet grain out perform the other? The 2004 Alliant load data shows 4. My Lymans 49th  Found my OAL with these bullets to be 1. 3g with a 124g projectile. 09" and they are very accurate out of my SP-01. 150 OAL . 069. Also the OAL's vary from 1. 135" Start 4. 9gr under a 124 FMJ, on other forums I have seen 4. 145 to 1. Don't take anyone's word as gospel you'll need to work up the loads  I am getting my pistol shortly and want to start loading ammo to try. 8gr (816fps) and max load is 3. Data is limited to nill so thought I would ask. 5 as a max. 0 grains of TiteGroup. 06 up to 1. 150 just for reference. k2ro6x, bjt3fj, jaq, lrn, lebm, x3axms, gdyd, pd, 3gkdc, w2irn,